Contaminated cutting heads are the number one reason for machine downtime. A regularly serviced cutting head keeps your fiber laser doing what it does best: Cutting parts.
A hazed protective window or off-axis focus lens shows up first as dross on the bottom edge and taper across thick plate — long before an alarm fires.
Worn capacitive sensor rings lose calibration gradually, letting the head ride too close and risk a nozzle strike on warped material.
An overhaul restores factory tolerance for a fraction of a new head's cost, and far less than the machine downtime of a mid-run failure.
Every head is stripped to its housing, cleaned in a controlled environment, and rebuilt to OEM spec. Choose the level of work your head needs.
Complete strip-down, ultrasonic clean, optics inspection, seal and O-ring replacement, and full rebuild.
Collimating lens, focus lens, and protective window swapped and coating-inspected — the most common source of cut-quality loss.
Capacitive height sensor recalibration with ohmic continuity testing and stand-off verification against your machine's controller.
Priority intake with a loaner head where available, so your production line doesn't sit idle while your cutting head is on the bench.
Compatible with cutting heads including:
Tell us the make, model, and what you're seeing in your cuts. We'll come back with a scope of work.